Welcome to Kanglida International Holding Group Co.,Ltd !

Navigation
Tech support
Contact us
Hotline
86-371-68786444
Address:Kanglida International Holding Group Co.,Ltd
Location:主页 > Tech support >
What are the maintenance methods for forklift batteries?
Auther: Pubdate:2020-12-24
A storage battery is a device that converts chemical energy into electrical energy. The main function of a car is to start the engine. The battery provides the initial energy source for the car, therefore, the maintenance of the battery is very necessary.
 
  
 What are the maintenance methods for forklift batteries?
  What are the maintenance methods for forklift batteries? ? How much do you know about this problem? ? Today, the editor of Zhengzhou Kanglida Electronic Power Supply Co., Ltd. will give you some information on this issue. I hope it will be helpful to you. In the future, you can avoid detours when using and purchasing.
 
  
 
   1. Check the connection between the battery cells of the forklift and the connection of the battery's power output line to ensure that the battery is well connected to ensure that the current output is unblocked.
 
 
2. Before cutting off the connection between the forklift battery and the charger, first check the display of the charger and the record of the charger. If an error message is displayed on the charger panel, the charging of the battery is generally not finished, and the charger has been To interrupt the charging process, please contact the after-sales service personnel. After checking that the charging is normal, record the charging time of the charger, the output capacity and the average voltage of the cell at the end of charging, and then disconnect the battery from the charger.
 
  
 
3. Before connecting the plug of the forklift battery to the power socket of the forklift electrical appliance, first check whether the electrolyte level of each battery cell is within the standard range. If the electrolyte level is low, add distilled water. To the standard range (generally it is required that the liquid level of the electrolyte is 10-15mm over the ji plate. If possible, the automatic water filling system of the battery can be used to ensure that the water is added at the correct level each time). After filling, connect the battery to the power socket of the forklift.
 
  
 
  4. Clean the dust on the surface of the forklift battery to avoid the formation of a discharge loop on the surface of the battery and shorten the discharge time of the battery. But please be careful not to rinse with water, just wipe it with a clean cloth.
 
  
 
   Zhengzhou Kanglida Electronic Power Supply Co., Ltd. was established in 2000, specializing in the development, production and sales of 4 series of 2V, 4V, 6V, 12V maintenance-free lead-acid batteries and electronic chargers. Products are widely used in anti-theft alarm systems, fire alarm systems, building intercom systems, elevator emergency evacuation systems, emergency lights, attendance machines, sprayers, electronic scales, children's electric motorcycles, cartoon inflatable models, car washers, table turntables, parking locks, Strobe lights, traffic lights, DC screens, solar energy, wind energy, UPS, EPS and other backup power systems, if you choose a company, you must choose a company with guaranteed reputation and quality. This company has been operating for many years and has many years of experience. Experienced company, so if you need this, you may wish to contact us, I believe it is a good choice.

Message