Welcome to Kanglida International Holding Group Co.,Ltd !

Contact us
Hotline
86-371-68786444
Address:Kanglida International Holding Group Co.,Ltd
Location:主页 > News >
How to maintain the battery quarterly 
Auther: Pubdate:2021-06-02

Battery maintenance is indispensable. Whether it is manual operation or maintenance or automatic monitoring and management, it is to detect the abnormal failure of individual batteries or the equipment system failure that affects the battery charging and discharging performance in time, and take corrective measures to ensure the stability and reliability of the power system. To run.

 
  How to maintain the battery quarterly? ? How much do you know about this problem? ? Today, the editor of Zhengzhou Kanglida Electronic Power Supply Co., Ltd. will give you some relevant information on this issue. I hope it will be helpful to you. In the future, you can avoid detours when using and purchasing.
 
  ① Visually inspect the cleanliness of the outer surface of the battery, the integrity of the outer casing and the cover, whether the appearance of the battery is swollen or deformed, and whether the battery has overheated traces;
 
② Check and record the ambient temperature of the battery system and the average temperature that can represent the system at the unified detection point of the battery system every quarter. When the temperature is lower or higher than 25℃, the temperature control system should be adjusted. If no temperature control system is installed, The float voltage should be adjusted;
 
  ③ Measure and record the total floating charge voltage at the battery end and compare it with the value displayed on the panel meter. If there is a difference, find the cause and correct it in time;
 
How to maintain the battery quarterly 
  ④ Measure and record the float voltage of each battery in the system. Under normal circumstances, it should fluctuate within a certain range. If an abnormality is found, find out the cause and correct it;
 
  ⑤ To do a restorative discharge test, use a dummy load or actual load to discharge, that is, cut off the power supply and use the battery to supply power. After finding that the capacity of an individual battery is low, charge the battery evenly. If the capacity cannot be restored after the equalized charge, the battery with too low capacity should be replaced.
 
   Zhengzhou Kanglida Electronic Power Supply Co., Ltd. was established in 2000, specializing in the development, production and sales of 4 series of 2V, 4V, 6V, 12V maintenance-free lead-acid batteries and their electronic chargers. Products are widely used in anti-theft alarm systems, fire alarm systems, building intercom systems, elevator emergency evacuation systems, emergency lights, attendance machines, sprayers, electronic scales, children's electric motorcycles, cartoon inflatables, car washers, table turntables, parking locks, Flashing lights, traffic lights, DC screens, solar energy, wind energy, UPS, EPS and other backup power systems, if you choose a company, you must choose a company with guaranteed reputation and quality. This company has been operating for many years and has many years of experience. Experienced company, so if you have a need for this, you may wish to contact us, I believe it is a good choice.

Message